Xfiles file tree synchronization and cross-validation

What is

Xfiles is an interactive utility for comparing and merging one file tree with another over a network. It supports freeform work on several machines (no need to keep track of what files are changed on which machine). Xfiles can also be used as a cross-validating disk<->disk backup strategy (portions of a disk may go bad at any time, with no simple indication of which files were affected. Cross-validate against a second disk before backup to make sure you aren't backing up bad data).

A client/server program (GUI on the client) traverses a file tree and reports any files that are missing on the server machine, missing on the client machine, or different. For each such file, the file size/sizes and modification date(s) are shown, and a comparison (using Unix diff) can be obtained. For files that are missing from one tree, `similarly named' files in that tree are reported. Inconsistent files can then be copied in either direction or deleted on either machine. The file trees do not need to be accessible via nfs. Files checksums are computed in parallel, so largely similar trees can be compared over a slow network link. The client and server processes can also be run on the same machine.

Screenshot

Download

Read the LICENSE.txt file first. Xfiles is released under the GPL, but it optionally uses jpython which has its own open source license; the latter is preprinted in LICENSE.txt.

Download the latest xfilesBinary or xfilesSource archive.

Download jpython.jar if you want to do scripting (see scripting section below). jpython.jar is also needed to recompile the source, though small changes to the source will let it recompile without it. jpython.jar is not needed if you do not want to script.

Download the nativeFile archive only if you want native Unix link detection (see discussion at end). You probably do not need this.

License

Source and binary archives

Requirements

Java1.1 or later and JFC/Swing1.1 are needed.

www.javalobby.org has links to the various java implementations. Xfiles uses RMI which is not supported by Microsoft java. Xfiles will probably run under any java derived from Sun's implementation; at the current time it probably does not run under independent implementations such as Kaffe.

Xfiles uses Swing 1.1 beta3 or later, which has the newer "javax" naming convention. If you know about this, you'll know how to modify the source to run with an older version of Swing. Java 2.0 includes the Swing GUI classes. For Java 1.1, Swing can be obtained from http://java.sun.com/products/jfc/download.html

The diff button calls the Unix diff program. This functionality is not yet available on non-Unix operating systems.

Xfiles has run successfully with client and server running respectively on an Intel/Linux systems running Blackdown java 1.1.7a and between one of these and a SGI system running SGI's 1.1.6. Xfiles will probably run under Java1.2/2.0 but this has not been tested.

Running on an OS other than Unix/Linux will require creating a standard java wrapper such as a .bat script for Windows.

Preface to installation and running

Java tends to be poorly integrated with the underlying operating system. If you're new to java take care to read the directions below -- there are not yet conventions for where and how java programs (nor Java itself) should be installed, so the installation outlined below is not as streamlined as a Linux rpm or similar. The individual steps are easy however.

If you don't already have Java and/or Swing you'll need to select some location such as /usr/local; any direcory will work. Similarly, the Xfiles program can live anywhere. If you follow the installation below you will need to launch the program from the directory where it resides (this does not restrict its function). Changes to the shell files to make it run from any directory are evident.

The program and this documentation refer to client and server machines and directories. These are interchangable -- the server merely refers to the machine that the server is running on (see below).

Binary Installation

For both client and server machines, do the following steps:

Installation from Source

(The following instructions are for Unix/Linux)

To run

Usage

When the GUI comes up, select a directory and press the start button.

The client partially scans the client file tree at startup to allow you to select a sub-tree of the specified root if desired.

To save you time Xfiles first scans the whole tree before reporting any differences (this may take a while); all differences are then reported consecutively.

After synchronizing one directory, you can select another in the GUI and press start again. Currently the GUI file tree does not update to reflect deletions in earlier runs, however (see the TODO section).

Xfiles writes a file XFILES.LOG listing the selected actions.

Scripting

File selection and interaction with a revision control system such as RCS can be handled by scripting using jpython. To enable scripting, download the file jpython.jar and place it in the client and server launch directories. Then create a file xfiles.py, which also must be copied into both the client and server launch directories.

xfiles.py can define the following functions:

It is not necessary to define all of these functions, however, if a function is defined it should be correct -- if the function call generates an error Xfiles will quit. A sample xfiles.py file is contained with the distribution and listed at the end of this document.

Author

Primary author: J.P.Lewis www.idiom.com/~zilla
Contributors: Peter Gadjokov, Wolfgang Lugmayr, Dan Schmitt

Please e-mail problems, successes, fixes, and fears to: zilla@computer.org
Send email with subject line XFILES to be notified of updates.

To do

Version log

Sample xfiles.py script

The following example script implements these functions:
  • pathFilter(path) - Ignores all object files, libraries, .so files, RCS files, java class files
  • preCopy(path) - Checks out a file from RCS if needed before you copy over it.
  • postCopy(path) - Checks a newly copied file back into RCS with a message saying that Xfiles created the revision. Although jpython is quite compatible with regular python, this file is written using a mixture of python and java calls (for example, java string functions are used rather than the python string.split routine). This is done to limit the dependence on jpython to the one file jpython.jar.


    import java
    from java.io import File
    import java.lang.Runtime
    runtime = java.lang.Runtime.getRuntime()
    
    # ignore files that end with these strings
    skipextensions = ['RCS', ',v', '.o', '.so', '.a', '.class', '.jar']
    
    # return 1 if xfiles should visit this path, else 0
    #
    def pathFilter(path):
      print 'pathFilter(%s)' % path
      if path[len(path)-1] == '~':		# emacs backup file
        return 0			
      if path == 'so_locations':
        return 0
      spath = java.lang.String(path)
      for ext in skipextensions:
        if spath.endsWith(ext):
          return 0
      return 1
    
    # called before copying over a file
    # (check out from RCS if appropriate)
    #
    def preCopy(path):
      name = filename(path)
      spath = filedir(path)
      spath = spath + '/RCS/'
      print 'name = %s' % name
      if exists(spath):			# RCS/ exists
        spath = spath + name + ',v'
        print 'spath = %s' % spath
        if exists(spath):			# RCS/file,v exists
          docmd('co -l -f %s' % path)
    
    
    # called after copying over a file
    # (check in to RCS if appropriate)
    #
    def postCopy(path):
      name = filename(path)
      spath = filedir(path)
      spath = spath + '/RCS/'
      print 'name = %s' % name
      if exists(spath):			# RCS/ exists
        spath = spath + name + ',v'
        print 'spath = %s' % spath
        if exists(spath):			# RCS/file,v exists
          docmd('ci -u -f -mXfiles_copy_checkin %s' % path)
    
    # helper commands
    def docmd(cmd):
      if 1:
        print cmd
      pid = runtime.exec_(cmd)
      pid.waitFor()
    
    def filedir(path):
        result = File(path).getParent()
        if not result:
            if isabs(path):
                result = path # Must be root
            else:
                result = ""
        return result
    
    def filename(path):
        return File(path).getName()
    
    def exists(path):
        return File(path).exists()
    
    def isabs(path):
        return File(path).isAbsolute()
    

    Link/Alias detection

    This section is obsolete because Java link detection appears to work adequately.

    Because Xfiles traverses a directory tree, it needs to be able to distinguish between "real" files and links (aliases) so as to avoid an infinite loop in the case where a link points to a directory above itself. There are two approaches to this, and you need to select which one you will use:

    Xfiles will call the native function if it exists in the launch directory. Installation with the native function is a bit more work, and it does not exist for non-Unix operating systems yet.

    For most purposes it will probably be fine to use the built-in code. Read the appendix Links/Aliases/Shortcuts in Java for more details on this issue.

    Installation from Source, using native link detection