.\" $NetBSD: cpuctl.8,v 1.20.10.1 2023/08/23 18:06:49 martin Exp $ .\" .\" Copyright (c) 2007, 2008, 2012, 2015 The NetBSD Foundation, Inc. .\" All rights reserved. .\" .\" This code is derived from software contributed to The NetBSD Foundation .\" by Andrew Doran. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS .\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED .\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR .\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS .\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF .\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS .\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN .\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" .Dd May 17, 2019 .Dt CPUCTL 8 .Os .Sh NAME .Nm cpuctl .Nd program to control CPUs .Sh SYNOPSIS .Nm cpuctl .Op Fl v .Ar command .Op Ar arguments .Sh DESCRIPTION The .Nm command can be used to control and inspect the state of CPUs in the system. .Pp The first argument, .Ar command , specifies the action to take. Valid commands are: .Bl -tag -width identify .It identify Ar cpu Op Ar cpu ... Output information on the specified CPU's features and capabilities. Not available on all architectures. .It list For each CPU in the system, display the current state and time of the last state change. .It offline Ar cpu Op Ar cpu ... Set the specified CPUs off line. .Pp Unbound LWPs (lightweight processes) will not be executed on a CPU while it is off line. Bound LWPs will continue to be executed on the CPUs, and device interrupts routed to the CPUs will continue to be handled. A future release of the system may allow device interrupts to be re-routed away from individual CPUs. .Pp At least one CPU in the system must remain on line. .It online Ar cpu Op Ar cpu ... Set the specified CPUs on line, making them available to run unbound LWPs. .It ucode Xo .Op Ar cpu .Op Ar file .Xc This applies the microcode patch to CPUs. Unless .Fl v was given, errors indicating that the microcode already exists on the CPU in question are ignored. If .Ar cpu is not specified or \-1, all CPUs are updated. If .Ar cpu is \-2, the current CPUs are updated. The default filename is used if no filename is specified. The .Cm identify command prints the installed version on the specified CPUs. On success the .Cm identify command shows different ucode versions before and after this command. The ucode updates are found in the default firmware path found in sysctl hw.firmware.path. .It intr Ar cpu Op Ar cpu ... Enable interrupts for the specified CPUs if supported. .It nointr Ar cpu Op Ar cpu ... Disable interrupts for the specified CPUs if supported. .El .Pp Valid flags are: .Bl -tag -width indent .It Fl v Be more verbose. .El .Sh FILES .Bl -tag -width /dev/cpuctl -compact .It Pa /dev/cpuctl control device .It Pa /libdata/firmware/x86/amd/ The directory to install the microcode file for AMD CPUs into. The default filename is .Pa microcode_amd.bin for CPU families 0x10 to 0x14. The default filename is .Pa microcode_amd_famXXh.bin where .Dv XX is the CPU family starting with 15 (hex). Get it from .Lk https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/amd-ucode .El .Sh EXAMPLES Run .Dl cpuctl identify 0 and you should see something like this: .Bd -literal -offset indent cpu0: UCode version: 0x1000080 .Ed .Pp After applying the microcode patch with .Dl cpuctl ucode 0 you can see with .Dl cpuctl identify 0 that the patch got applied: .Bd -literal -offset indent cpu0: UCode version: 0x1000083 .Ed .Sh SEE ALSO .Xr intrctl 8 , .Xr psrset 8 , .Xr schedctl 8 , .Xr sysctl 8 , .Xr firmload 9 .Sh HISTORY The .Nm command first appeared in .Nx 5.0 .