# All global changes to build and install should follow this line. # Disable LTO in userspace packages. %global _lto_cflags %{nil} # The libexec directory is not used by the linker, so the shared object there # should not be exported to RPM provides. %global __provides_exclude_from ^%{_libexecdir}/kselftests # Disable the find-provides.ksyms script. %global __provided_ksyms_provides %{nil} # All global wide changes should be above this line otherwise # the %%install section will not see them. %global __spec_install_pre %{___build_pre} # Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins # to compress by single-threaded xz. Switch to threaded compression, # and from level 2 to 3 to keep compressed sizes close to "w2" results. # # NB: if default compression in /usr/lib/rpm/redhat/macros ever changes, # this one might need tweaking (e.g. if default changes to w3.xzdio, # change below to w4T.xzdio): %global _binary_payload w3T.xzdio # Define the version of the Linux Kernel Archive tarball. %global LKAver 6.1.119 # Define the buildid, if required. #global buildid .local # Determine the sublevel number and set pkg_version. %define sublevel %(echo %{LKAver} | %{__awk} -F\. '{ print $3 }') %if "%{sublevel}" == "" %global pkg_version %{LKAver}.0 %else %global pkg_version %{LKAver} %endif # Set pkg_release. %global pkg_release 1%{?buildid}%{?dist} # Architectures upon which we can sign the kernel # for secure boot authentication. %ifarch x86_64 || aarch64 %global signkernel 1 %else %global signkernel 0 %endif # Sign modules on all architectures that build modules. %ifarch x86_64 || aarch64 %global signmodules 1 %else %global signmodules 0 %endif ### BCAT # Further investigation is required before these features # are enabled for the ELRepo Project kernels. %global signkernel 0 %global signmodules 0 ### BCAT # Compress modules on all architectures that build modules. %ifarch x86_64 || aarch64 %global zipmodules 1 %else %global zipmodules 0 %endif %if %{zipmodules} %global zipsed -e 's/\.ko$/\.ko.xz/' # For parallel xz processes. Replace with 1 to go back to single process. %global zcpu `nproc --all` %endif # The following build options are enabled by default, but may become disabled # by later architecture-specific checks. These can also be disabled by using # --without in the rpmbuild command, or by forcing these values to 0. # # kernel-lt %define with_std %{?_without_std: 0} %{?!_without_std: 1} # # kernel-lt-headers %define with_headers %{?_without_headers: 0} %{?!_without_headers: 1} # # kernel-lt-doc %define with_doc %{?_without_doc: 0} %{?!_without_doc: 1} # # perf %define with_perf %{?_without_perf: 0} %{?!_without_perf: 1} # # tools %define with_tools %{?_without_tools: 0} %{?!_without_tools: 1} # # bpf tool %define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1} # # control whether to install the vdso directories %define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1} # # Additional option for toracat-friendly, one-off, kernel-lt building. # Only build the base kernel-lt (--with baseonly): %define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0} %global KVERREL %{pkg_version}-%{pkg_release}.%{_target_cpu} # If requested, only build base kernel-lt package. %if %{with_baseonly} %define with_doc 0 %define with_perf 0 %define with_tools 0 %define with_bpftool 0 %define with_vdso_install 0 %endif %ifarch noarch %define with_std 0 %define with_headers 0 %define with_perf 0 %define with_tools 0 %define with_bpftool 0 %define with_vdso_install 0 %endif %ifarch x86_64 || aarch64 %define with_doc 0 %endif %ifarch x86_64 %define asmarch x86 %define bldarch x86_64 %define hdrarch x86_64 %define make_target bzImage %define kernel_image arch/x86/boot/bzImage %endif %ifarch aarch64 %define asmarch arm64 %define bldarch arm64 %define hdrarch arm64 %define make_target Image.gz %define kernel_image arch/arm64/boot/Image.gz %endif %if %{with_vdso_install} %define use_vdso 1 %define _use_vdso 1 %else %define _use_vdso 0 %endif # # Packages that need to be installed before the kernel is installed, # as they will be used by the %%post scripts. # %define kernel_lt_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install %define initrd_prereq dracut >= 027 Name: kernel-lt Summary: The Linux kernel. (The core of any Linux kernel based operating system.) License: GPLv2 and Redistributable, no modification permitted. URL: https://www.kernel.org/ Version: %{pkg_version} Release: %{pkg_release} ExclusiveArch: x86_64 aarch64 noarch ExclusiveOS: Linux Provides: kernel = %{version}-%{release} Provides: installonlypkg(kernel) Requires: %{name}-core-uname-r = %{KVERREL} Requires: %{name}-modules-uname-r = %{KVERREL} # # List the packages required for the kernel-lt build. # BuildRequires: bash, bc, binutils, bison, bzip2, coreutils, diffutils, dwarves, elfutils-devel BuildRequires: findutils, flex, gawk, gcc, gcc-c++, gcc-plugin-devel, git-core, glibc-static BuildRequires: gzip, hmaccalc, hostname, kernel-rpm-macros >= 185-9, kmod, m4, make, net-tools BuildRequires: patch, perl-Carp, perl-devel, perl-generators, perl-interpreter, python3-devel BuildRequires: redhat-rpm-config, tar, which, xz %ifarch x86_64 || aarch64 BuildRequires: bpftool, openssl-devel %endif %if %{with_headers} BuildRequires: rsync %endif %if %{with_doc} BuildRequires: asciidoc, python3-sphinx, python3-sphinx_rtd_theme, xmlto %endif %if %{with_perf} BuildRequires: asciidoc, audit-libs-devel, binutils-devel, bison, flex, java-devel BuildRequires: libbabeltrace-devel, libbpf-devel, libtraceevent-devel, newt-devel BuildRequires: numactl-devel, openssl-devel, perl(ExtUtils::Embed), xmlto BuildRequires: xz-devel, zlib-devel %ifarch aarch64 BuildRequires: opencsd-devel >= 1.0.0 %endif %endif %if %{with_tools} BuildRequires: asciidoc, gettext, libcap-devel, libcap-ng-devel, libnl3-devel BuildRequires: ncurses-devel, openssl-devel, pciutils-devel %endif %if %{with_bpftool} BuildRequires: binutils-devel, python3-docutils, zlib-devel %endif %if %{signkernel} || %{signmodules} BuildRequires: openssl %if %{signkernel} BuildRequires: nss-tools, pesign >= 0.10-4, system-sb-certs %endif %endif BuildConflicts: rhbuildsys(DiskFree) < 500Mb ### ### Sources ### Source0: https://www.kernel.org/pub/linux/kernel/v6.x/linux-%{LKAver}.tar.xz Source2: config-%{version}-x86_64 Source4: config-%{version}-aarch64 Source20: mod-denylist.sh Source21: mod-sign.sh Source23: x509.genkey Source26: mod-extra.list Source34: filter-x86_64.sh Source37: filter-aarch64.sh Source40: filter-modules.sh Source100: rheldup3.x509 Source101: rhelkpatch1.x509 Source2000: cpupower.service Source2001: cpupower.config Source2002: kvm_stat.logrotate # Do not package the source tarball. # To build .src.rpm, run with '--with src' %if %{?_with_src:0}%{!?_with_src:1} NoSource: 0 %endif %if %{signkernel} %define secureboot_ca_0 %{_datadir}/pki/sb-certs/secureboot-ca-%{_arch}.cer %define secureboot_key_0 %{_datadir}/pki/sb-certs/secureboot-kernel-%{_arch}.cer %define pesign_name_0 redhatsecureboot501 %endif %description The %{name} meta package. # # This macro does requires, provides, conflicts, obsoletes for a kernel-lt package. # %%kernel_lt_reqprovconf # It uses any kernel_lt__conflicts and kernel_lt__obsoletes # macros defined above. # %define kernel_lt_reqprovconf \ Provides: %{name} = %{pkg_version}-%{pkg_release}\ Provides: %{name}-%{_target_cpu} = %{pkg_version}-%{pkg_release}%{?1:+%{1}}\ Provides: %{name}-drm-nouveau = 16\ Provides: %{name}-uname-r = %{KVERREL}%{?1:+%{1}}\ Requires(pre): %{kernel_lt_prereq}\ Requires(pre): %{initrd_prereq}\ Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\ Recommends: linux-firmware\ Requires(preun): systemd >= 200\ Conflicts: xfsprogs < 4.3.0-1\ Conflicts: xorg-x11-drv-vmmouse < 13.0.99\ %{expand:%%{?kernel_lt%{?1:_%{1}}_conflicts:Conflicts: %%{%{name}%{?1:_%{1}}_conflicts}}}\ %{expand:%%{?kernel_lt%{?1:_%{1}}_obsoletes:Obsoletes: %%{%{name}%{?1:_%{1}}_obsoletes}}}\ %{expand:%%{?kernel_lt%{?1:_%{1}}_provides:Provides: %%{%{name}%{?1:_%{1}}_provides}}}\ # We can't let RPM do the dependencies automatically because it'll then pick up\ # a correct but undesirable perl dependency from the module headers which\ # isn't required for the kernel proper to function.\ AutoReq: no\ AutoProv: yes\ %{nil} %package headers Summary: Header files for the Linux kernel, used by glibc. Obsoletes: glibc-kernheaders < 3.0-46 Provides: glibc-kernheaders = 3.0-46 %description headers The Linux kernel headers includes the C header files that specify the interface between the Linux kernel and userspace libraries and programs. The header files define structures and constants that are needed for building most standard programs and are also needed for rebuilding the glibc package. %package doc Summary: Various documentation bits found in the Linux kernel source. Group: Documentation %description doc This package contains documentation files from the Linux kernel source. Various bits of information about the Linux kernel and the device drivers shipped with it are documented in these files. You'll want to install this package if you need a reference to the options that can be passed to Linux kernel modules at load time. %if %{with_perf} %package -n perf Summary: Performance monitoring for the Linux kernel. Requires: bzip2 License: GPLv2 %description -n perf This package contains the perf tool, which enables performance monitoring of the Linux kernel. %package -n python3-perf Summary: Python bindings for apps which will manipulate perf events. %description -n python3-perf This package contains a module that permits applications written in the Python programming language to use the interface to manipulate perf events. %endif %if %{with_tools} %package -n %{name}-tools Summary: Assortment of tools for the Linux kernel. License: GPLv2 Obsoletes: kernel-tools < %{version} Provides: kernel-tools = %{version}-%{release} Obsoletes: cpupowerutils < 1:009-0.6.p1 Provides: cpupowerutils = 1:009-0.6.p1 Obsoletes: cpufreq-utils < 1:009-0.6.p1 Provides: cpufreq-utils = 1:009-0.6.p1 Obsoletes: cpufrequtils < 1:009-0.6.p1 Provides: cpufrequtils = 1:009-0.6.p1 Obsoletes: cpuspeed < 1:1.5-16 Requires: %{name}-tools-libs = %{version}-%{release} %if "%{name}" == "kernel-ml" Conflicts: kernel-lt-tools %else # it's kernel-lt Conflicts: kernel-ml-tools %endif %define __requires_exclude ^%{_bindir}/python %description -n %{name}-tools This package contains the tools/ directory from the Linux kernel source and the supporting documentation. %package -n %{name}-tools-libs Summary: Libraries for the %{name}-tools. License: GPLv2 Obsoletes: kernel-tools-libs < %{version} Provides: kernel-tools-libs = %{version}-%{release} %if "%{name}" == "kernel-ml" Conflicts: kernel-lt-tools-libs %else # it's kernel-lt Conflicts: kernel-ml-tools-libs %endif %description -n %{name}-tools-libs This package contains the libraries built from the tools/ directory of the Linux kernel source. %package -n %{name}-tools-libs-devel Summary: Development files for the %{name}-tools libraries. License: GPLv2 Obsoletes: kernel-tools-libs-devel < %{version} Provides: kernel-tools-libs-devel = %{version}-%{release} Obsoletes: cpupowerutils-devel < 1:009-0.6.p1 Provides: cpupowerutils-devel = 1:009-0.6.p1 Provides: %{name}-tools-devel Requires: %{name}-tools-libs = %{version}-%{release} Requires: %{name}-tools = %{version}-%{release} %if "%{name}" == "kernel-ml" Conflicts: kernel-lt-tools-libs-devel %else # it's kernel-lt Conflicts: kernel-ml-tools-libs-devel %endif %description -n %{name}-tools-libs-devel This package contains the development files for the tools/ directory of the Linux kernel source. %endif %if %{with_bpftool} %package -n bpftool Summary: Inspection and simple manipulation of eBPF programs and maps. License: GPLv2 %description -n bpftool This package contains the bpftool, which allows inspection and simple manipulation of eBPF programs and maps. %endif # # This macro creates a kernel-lt--devel package. # %%kernel_lt_devel_package [-m] # %define kernel_lt_devel_package(m) \ %package %{?1:%{1}-}devel\ Summary: Development package for building %{name} modules to match the %{?2:%{2} }%{name}.\ Provides: %{name}%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\ Provides: %{name}-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: %{name}-devel-uname-r = %{KVERREL}%{?1:+%{1}}\ Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\ Provides: kernel-devel = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel)\ Provides: installonlypkg(kernel-lt)\ AutoReqProv: no\ Requires(pre): findutils\ Requires: findutils\ Requires: perl-interpreter\ Requires: openssl-devel\ Requires: elfutils-libelf-devel\ Requires: bison\ Requires: flex\ Requires: make\ Requires: gcc\ %if %{-m:1}%{!-m:0}\ Requires: %{name}-devel-uname-r = %{KVERREL}\ %endif\ %description %{?1:%{1}-}devel\ This package provides %{name} headers and makefiles sufficient to build modules\ against the %{?2:%{2} }%{name} package.\ %{nil} # # This macro creates an empty kernel-lt--devel-matched package that # requires both the core and devel packages locked on the same version. # %%kernel_lt_devel_matched_package [-m] # %define kernel_lt_devel_matched_package(m) \ %package %{?1:%{1}-}devel-matched\ Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }%{name}.\ Requires: %{name}%{?1:-%{1}}-devel = %{version}-%{release}\ Requires: %{name}%{?1:-%{1}}-core = %{version}-%{release}\ %description %{?1:%{1}-}devel-matched\ This meta package is used to install matching core and devel packages for a given %{?2:%{2} }%{name}.\ %{nil} # # This macro creates a kernel-lt--modules-extra package. # %%kernel_lt_modules_extra_package [-m] # %define kernel_lt_modules_extra_package(m) \ %package %{?1:%{1}-}modules-extra\ Summary: Extra %{name} modules to match the %{?2:%{2} }%{name}.\ Provides: %{name}%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\ Provides: %{name}%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: %{name}%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ Provides: installonlypkg(kernel-lt-module)\ Provides: %{name}%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\ Requires: %{name}-uname-r = %{KVERREL}%{?1:+%{1}}\ Requires: %{name}%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\ %if %{-m:1}%{!-m:0}\ Requires: %{name}-modules-extra-uname-r = %{KVERREL}\ %endif\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules-extra\ This package provides less commonly used %{name} modules for the %{?2:%{2} }%{name} package.\ %{nil} # # This macro creates a kernel-lt--modules package. # %%kernel_lt_modules_package [-m] # %define kernel_lt_modules_package(m) \ %package %{?1:%{1}-}modules\ Summary: %{name} modules to match the %{?2:%{2}-}core %{name}.\ Provides: %{name}%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\ Provides: %{name}-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: %{name}-modules = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ Provides: installonlypkg(kernel-lt-module)\ Provides: %{name}%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\ Requires: %{name}-uname-r = %{KVERREL}%{?1:+%{1}}\ %if %{-m:1}%{!-m:0}\ Requires: %{name}-modules-uname-r = %{KVERREL}\ %endif\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules\ This package provides commonly used %{name} modules for the %{?2:%{2}-}core %{name} package.\ %{nil} # # this macro creates a kernel-lt- meta package. # %%kernel_lt_meta_package # %define kernel_lt_meta_package() \ %package %{1}\ Summary: %{name} meta-package for the %{1} ${name}.\ Requires: %{name}-%{1}-core-uname-r = %{KVERREL}+%{1}\ Requires: %{name}-%{1}-modules-uname-r = %{KVERREL}+%{1}\ Provides: installonlypkg(kernel)\ Provides: installonlypkg(kernel-lt)\ %description %{1}\ The meta-package for the %{1} %{name}.\ %{nil} # # This macro creates a kernel-lt- and its -devel. # %%define variant_summary The Linux kernel-lt compiled for # %%kernel_lt_variant_package [-n ] [-m] # %define kernel_lt_variant_package(n:m) \ %package %{?1:%{1}-}core\ Summary: %{variant_summary}.\ Provides: %{name}-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\ Provides: installonlypkg(kernel)\ Provides: installonlypkg(kernel-lt)\ %if %{-m:1}%{!-m:0}\ Requires: %{name}-core-uname-r = %{KVERREL}\ %endif\ %{expand:%%kernel_lt_reqprovconf}\ %if %{?1:1} %{!?1:0} \ %{expand:%%kernel_lt_meta_package %{?1:%{1}}}\ %endif\ %{expand:%%kernel_lt_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\ %{expand:%%kernel_lt_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\ %{expand:%%kernel_lt_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\ %{expand:%%kernel_lt_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\ %{nil} # And, finally, the main -core package. %define variant_summary The Linux kernel. %kernel_lt_variant_package %description core The %{name} package contains the Linux kernel (vmlinuz), the core of any Linux kernel based operating system. The %{name} package handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc. # Disable the building of the debug package(s). %global debug_package %{nil} # Disable the creation of build_id symbolic links. %global _build_id_links none # Set up our "big" %%{make} macro. %global make %{__make} -s HOSTCFLAGS="%{?build_cflags}" HOSTLDFLAGS="%{?build_ldflags}" %prep %ifarch x86_64 || aarch64 %if %{with_baseonly} %if !%{with_std} echo "Cannot build --with baseonly as the standard build is currently disabled." exit 1 %endif %endif %endif %setup -q -n %{name}-%{version} -c mv linux-%{LKAver} linux-%{KVERREL} pushd linux-%{KVERREL} > /dev/null # Purge the source tree of all unrequired dot-files. find . -name '.*' -type f -delete # Mangle all Python shebangs to be Python 3 explicitly. # -i specifies the interpreter for the shebang # -n prevents creating ~backup files # -p preserves timestamps # This fixes errors such as # *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly. # Process all files in the Documentation, scripts and tools directories. pathfix.py -i "%{__python3} %{py3_shbang_opts}" -n -p \ tools/kvm/kvm_stat/kvm_stat \ scripts/show_delta \ scripts/jobserver-exec \ scripts/diffconfig \ scripts/clang-tools \ scripts/bloat-o-meter \ tools \ scripts \ Documentation \ 2>&1 | grep -Ev 'recursedown|no change' mv COPYING COPYING-%{version}-%{release} cp -a %{SOURCE2} . cp -a %{SOURCE4} . # Set the EXTRAVERSION string in the top level Makefile. sed -i "s@^EXTRAVERSION.*@EXTRAVERSION = -%{release}.%{_target_cpu}@" Makefile %ifarch x86_64 || aarch64 cp config-%{version}-%{_target_cpu} .config %{__make} -s ARCH=%{bldarch} listnewconfig | grep -E '^CONFIG_' > newoptions-el9-%{_target_cpu}.txt || true if [ -s newoptions-el9-%{_target_cpu}.txt ]; then cat newoptions-el9-%{_target_cpu}.txt exit 1 fi rm -f newoptions-el9-%{_target_cpu}.txt %endif # Add DUP and kpatch certificates to system trusted keys for RHEL. %if %{signkernel} || %{signmodules} openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem cat rheldup3.pem rhelkpatch1.pem > certs/rhel.pem for i in config-%{version}-*; do sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS="*"@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i done %else for i in config-%{version}-*; do sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS="*"@CONFIG_SYSTEM_TRUSTED_KEYS=""@' $i done %endif # Adjust the FIPS module name for RHEL9. for i in config-%{version}-*; do sed -i 's@CONFIG_CRYPTO_FIPS_NAME=.*@CONFIG_CRYPTO_FIPS_NAME="Red Hat Enterprise Linux 9 - Kernel Cryptographic API"@' $i done %{__make} -s distclean popd > /dev/null %build pushd linux-%{KVERREL} > /dev/null %ifarch x86_64 || aarch64 cp config-%{version}-%{_target_cpu} .config %{__make} -s ARCH=%{bldarch} oldconfig %if %{signkernel} || %{signmodules} cp %{SOURCE23} certs/ %endif %if %{with_std} %{make} %{?_smp_mflags} ARCH=%{bldarch} %{make_target} %{make} %{?_smp_mflags} ARCH=%{bldarch} modules || exit 1 %ifarch aarch64 %{make} %{?_smp_mflags} ARCH=%{bldarch} dtbs %endif %if %{with_bpftool} # Generate a vmlinux.h file. bpftool btf dump file vmlinux format c > tools/bpf/bpftool/vmlinux.h RPM_VMLINUX_H=vmlinux.h %endif %endif %if %{with_perf} %ifarch aarch64 %global perf_build_extra_opts CORESIGHT=1 %endif %global perf_make \ %{__make} -s -C tools/perf NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3} # Make sure that check-headers.sh is executable. chmod +x tools/perf/check-headers.sh %{perf_make} all %endif %if %{with_tools} # Make sure that version-gen.sh is executable. chmod +x tools/power/cpupower/utils/version-gen.sh pushd tools/power/cpupower > /dev/null %{__make} -s %{?_smp_mflags} CPUFREQ_BENCH=false DEBUG=false popd > /dev/null %ifarch x86_64 pushd tools/power/cpupower/debug/x86_64 > /dev/null %{__make} -s %{?_smp_mflags} centrino-decode powernow-k8-decode popd > /dev/null pushd tools/power/x86/x86_energy_perf_policy > /dev/null %{__make} -s %{?_smp_mflags} popd > /dev/null pushd tools/power/x86/turbostat > /dev/null %{__make} -s %{?_smp_mflags} popd > /dev/null pushd tools/power/x86/intel-speed-select > /dev/null %{__make} -s %{?_smp_mflags} popd > /dev/null %endif pushd tools/thermal/tmon > /dev/null %{__make} -s %{?_smp_mflags} popd > /dev/null pushd tools/iio > /dev/null %{__make} -s %{?_smp_mflags} popd > /dev/null pushd tools/gpio > /dev/null %{__make} -s %{?_smp_mflags} popd > /dev/null pushd tools/vm > /dev/null %{__make} -s %{?_smp_mflags} slabinfo page_owner_sort popd > /dev/null %endif %if %{with_bpftool} %global bpftool_make \ %{__make} -s EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT VMLINUX_H="${RPM_VMLINUX_H}" pushd tools/bpf/bpftool > /dev/null %{bpftool_make} popd > /dev/null %endif %endif popd > /dev/null %install %define __modsign_install_post \ if [ "%{signmodules}" -eq "1" ]; then \ if [ "%{with_std}" -ne "0" ]; then \ %{SOURCE21} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \ fi \ fi \ if [ "%{zipmodules}" -eq "1" ]; then \ find $RPM_BUILD_ROOT/lib/modules/ -name '*.ko' -type f | xargs --no-run-if-empty -P%{zcpu} xz \ fi \ %{nil} # # Ensure modules are signed *after* all invocations of # strip have occured, which are in __os_install_post. # %define __spec_install_post \ %{__arch_install_post}\ %{__os_install_post}\ %{__modsign_install_post} pushd linux-%{KVERREL} > /dev/null rm -fr $RPM_BUILD_ROOT %ifarch x86_64 || aarch64 mkdir -p $RPM_BUILD_ROOT %if %{with_std} mkdir -p $RPM_BUILD_ROOT/boot mkdir -p $RPM_BUILD_ROOT%{_libexecdir} mkdir -p $RPM_BUILD_ROOT/lib/modules/%{KVERREL} mkdir -p $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/systemtap %ifarch aarch64 %{make} ARCH=%{bldarch} dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/boot/dtb-%{KVERREL} cp -r $RPM_BUILD_ROOT/boot/dtb-%{KVERREL} $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/dtb find arch/%{bldarch}/boot/dts -name '*.dtb' -type f -delete %endif # Install the results within the RPM_BUILD_ROOT directory. install -m 644 .config $RPM_BUILD_ROOT/boot/config-%{KVERREL} install -m 644 .config $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/config install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-%{KVERREL} install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/System.map # We estimate the size of the initramfs because rpm needs to take this size # into consideration when performing disk space calculations. (See bz #530778) dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-%{KVERREL}.img bs=1M count=20 %if %{signkernel} # Sign the kernel image if we're using EFI. # aarch64 kernels are gziped EFI images. %ifarch x86_64 SignImage=arch/x86/boot/bzImage %endif %ifarch aarch64 SignImage=arch/arm64/boot/Image %endif %pesign -s -i $SignImage -o vmlinuz.signed -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0} if [ ! -s vmlinuz.signed ]; then echo "pesigning failed" exit 1 fi mv vmlinuz.signed $SignImage %ifarch aarch64 gzip -f9 $SignImage %endif %endif cp %{kernel_image} $RPM_BUILD_ROOT/boot/vmlinuz-%{KVERREL} chmod 755 $RPM_BUILD_ROOT/boot/vmlinuz-%{KVERREL} cp $RPM_BUILD_ROOT/boot/vmlinuz-%{KVERREL} $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/vmlinuz sha512hmac $RPM_BUILD_ROOT/boot/vmlinuz-%{KVERREL} | sed -e "s,$RPM_BUILD_ROOT,," > $RPM_BUILD_ROOT/boot/.vmlinuz-%{KVERREL}.hmac cp $RPM_BUILD_ROOT/boot/.vmlinuz-%{KVERREL}.hmac $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/.vmlinuz.hmac # Override mod-fw because we don't want it to install any firmware. # We'll get it from the linux-firmware package and we don't want conflicts. %{make} %{?_smp_mflags} ARCH=%{bldarch} INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=%{KVERREL} mod-fw= # Add a noop %%defattr statement because rpm doesn't like empty file list files. echo '%%defattr(-,-,-)' > ../%{name}-ldsoconf.list %if %{with_vdso_install} %{make} %{?_smp_mflags} ARCH=%{bldarch} INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=%{KVERREL} if [ -s ldconfig-%{name}.conf ]; then install -D -m 444 ldconfig-%{name}.conf $RPM_BUILD_ROOT/etc/ld.so.conf.d/%{name}-%{KVERREL}.conf echo /etc/ld.so.conf.d/%{name}-%{KVERREL}.conf >> ../%{name}-ldsoconf.list fi %endif # # This looks scary but the end result is supposed to be: # # - all arch relevant include/ files. # - all Makefile and Kconfig files. # - all script/ files. # rm -f $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build rm -f $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/source mkdir -p $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build pushd $RPM_BUILD_ROOT/lib/modules/%{KVERREL} > /dev/null ln -s build source popd > /dev/null mkdir -p $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/updates mkdir -p $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/weak-updates # CONFIG_KERNEL_HEADER_TEST generates some extra files during testing so just delete them. find . -name *.h.s -delete # First copy everything . . . cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build if [ ! -e Module.symvers ]; then touch Module.symvers fi cp Module.symvers $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp System.map $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build if [ -s Module.markers ]; then cp Module.markers $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build fi gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-%{KVERREL}.gz cp $RPM_BUILD_ROOT/boot/symvers-%{KVERREL}.gz $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/symvers.gz # . . . then drop all but the needed Makefiles and Kconfig files. rm -fr $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/scripts rm -fr $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/include cp .config $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a scripts $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build rm -fr $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/scripts/tracing rm -f $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/scripts/spdxcheck.py # Files for 'make scripts' to succeed with kernel-lt-devel. mkdir -p $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/security/selinux/include cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build mkdir -p $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/tools/include/tools cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build # Files for 'make prepare' to succeed with kernel-lt-devel. cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build if [ -f tools/objtool/objtool ]; then cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/tools/objtool/ || : fi if [ -f tools/objtool/fixdep ]; then cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/tools/objtool/ || : fi if [ -d arch/%{bldarch}/scripts ]; then cp -a arch/%{bldarch}/scripts $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/arch/%{_arch} || : fi if [ -f arch/%{bldarch}/*lds ]; then cp -a arch/%{bldarch}/*lds $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/arch/%{_arch}/ || : fi if [ -f arch/%{asmarch}/kernel/module.lds ]; then cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ fi find $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} + if [ -d arch/%{asmarch}/include ]; then cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ fi %ifarch aarch64 # arch/arm64/include/asm/xen references arch/arm cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ # arch/arm64/include/asm/opcodes.h references arch/arm cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ %endif cp -a include $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/include %ifarch x86_64 # Files required for 'make prepare' to succeed with kernel-lt-devel. cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/ cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build %endif # Clean up the intermediate tools files. find $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} + # Make sure that the Makefile and the version.h file have a matching timestamp # so that external modules can be built. touch -r $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/Makefile \ $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build/include/generated/uapi/linux/version.h find $RPM_BUILD_ROOT/lib/modules/%{KVERREL} -name "*.ko" -type f > modnames # Mark the modules executable, so that strip-to-file can strip them. xargs --no-run-if-empty chmod u+x < modnames # Generate a list of modules for block and networking. grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA | \ sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef collect_modules_list() { sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef | \ LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/modules.$1 if [ ! -z "$3" ]; then sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/modules.$1 fi } collect_modules_list networking \ 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice' collect_modules_list block \ 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko' collect_modules_list drm \ 'drm_open|drm_init' collect_modules_list modesetting \ 'drm_crtc_init' # Detect any missing or incorrect license tags. ( find $RPM_BUILD_ROOT/lib/modules/%{KVERREL} -name '*.ko' -type f | xargs --no-run-if-empty /sbin/modinfo -l | \ grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1 remove_depmod_files() { # Remove all the files that will be auto generated by depmod at the kernel install time. pushd $RPM_BUILD_ROOT/lib/modules/%{KVERREL} > /dev/null rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \ modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin} popd > /dev/null } remove_depmod_files # Identify modules in the kernel-lt-modules-extras package %{SOURCE20} $RPM_BUILD_ROOT lib/modules/%{KVERREL} %{SOURCE26} # # Generate the kernel-lt-core and kernel-lt-modules file lists. # # Make a copy of the System.map file for depmod to use. cp System.map $RPM_BUILD_ROOT/ pushd $RPM_BUILD_ROOT > /dev/null # Create a backup of the full module tree so it can be # restored after the filtering has been completed. mkdir restore cp -r lib/modules/%{KVERREL}/* restore/ # Don't include anything going into kernel-lt-modules-extra in the file lists. xargs rm -fr < mod-extra.list # Find all the module files and filter them out into the core and modules lists. # This actually removes anything going into kernel-lt-modules from the directory. find lib/modules/%{KVERREL}/kernel -name *.ko -type f | sort -n > modules.list cp $RPM_SOURCE_DIR/filter-*.sh . ./filter-modules.sh modules.list %{_target_cpu} rm -f filter-*.sh ### BCAT %if 0 # Run depmod on the resulting module tree to make sure that the tree isn't broken. depmod -b . -aeF ./System.map %{KVERREL} &> depmod.out if [ -s depmod.out ]; then echo "Depmod failure" cat depmod.out exit 1 else rm -f depmod.out fi remove_depmod_files %endif ### BCAT # Go back and find all of the various directories in the tree. # We use this for the directory lists in kernel-lt-core. find lib/modules/%{KVERREL}/kernel -mindepth 1 -type d | sort -n > module-dirs.list # Cleanup. rm -f System.map cp -r restore/* lib/modules/%{KVERREL}/ rm -fr restore popd > /dev/null # Make sure that the files lists start with absolute paths or rpmbuild fails. # Also add in the directory entries. sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../%{name}-modules.list sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../%{name}-core.list sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../%{name}-core.list sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../%{name}-modules-extra.list # Cleanup. rm -f $RPM_BUILD_ROOT/k-d.list rm -f $RPM_BUILD_ROOT/module-dirs.list rm -f $RPM_BUILD_ROOT/modules.list rm -f $RPM_BUILD_ROOT/mod-extra.list # Move the development files out of the /lib/modules/ file system. mkdir -p $RPM_BUILD_ROOT/usr/src/kernels mv $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build $RPM_BUILD_ROOT/usr/src/kernels/%{KVERREL} # This is going to create a broken link during the build but we don't use # it after this point. We need the link to actually point to something # for when the kernel-lt-devel package is installed. ln -sf /usr/src/kernels/%{KVERREL} $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/build # Move the generated vmlinux.h file into the kernel-lt-devel directory structure. if [ -f tools/bpf/bpftool/vmlinux.h ]; then mv tools/bpf/bpftool/vmlinux.h $RPM_BUILD_ROOT/usr/src/kernels/%{KVERREL}/ fi # Purge the kernel-lt-devel tree of leftover junk. find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -type f -delete # Red Hat UEFI Secure Boot CA certificate, which can be used to authenticate the kernel. mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/%{name}-keys/%{KVERREL} %if %{signkernel} install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/%{name}-keys/%{KVERREL}/kernel-signing-ca.cer %endif %if %{signmodules} # Save the signing keys so that we can sign the modules in __modsign_install_post. cp certs/signing_key.pem certs/signing_key.pem.sign cp certs/signing_key.x509 certs/signing_key.x509.sign %endif %endif # We have to do the headers install before the tools install because the # kernel-lt headers_install will remove any header files in /usr/include that # it doesn't install itself. %if %{with_headers} # Install kernel-lt headers %{__make} -s ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install find $RPM_BUILD_ROOT/usr/include \ \( -name .install -o -name .check -o \ -name ..install.cmd -o -name ..check.cmd \) -delete %endif %if %{with_perf} # perf tool binary and supporting scripts/binaries %{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin # Remove the 'trace' symlink. rm -f $RPM_BUILD_ROOT%{_bindir}/trace # For both of the below, yes, this should be using a macro but right now # it's hard coded and we don't actually want it anyway. # Remove examples. rm -fr $RPM_BUILD_ROOT/usr/lib/perf/examples rm -fr $RPM_BUILD_ROOT/usr/lib/perf/include # python-perf extension %{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext # perf man pages (note: implicit rpm magic compresses them later) mkdir -p $RPM_BUILD_ROOT%{_mandir}/man1 %{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man # Remove any tracevent files, eg. its plugins still gets built and installed, # even if we build against system's libtracevent during perf build (by setting # LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already # ship with libtraceevent package. rm -fr $RPM_BUILD_ROOT%{_libdir}/traceevent %endif %if %{with_tools} %{__make} -s -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install rm -f $RPM_BUILD_ROOT%{_libdir}/*.{a,la} %find_lang cpupower mv cpupower.lang ../ %ifarch x86_64 pushd tools/power/cpupower/debug/x86_64 > /dev/null install -m755 centrino-decode $RPM_BUILD_ROOT%{_bindir}/centrino-decode install -m755 powernow-k8-decode $RPM_BUILD_ROOT%{_bindir}/powernow-k8-decode popd > /dev/null %endif chmod 0755 $RPM_BUILD_ROOT%{_libdir}/libcpupower.so* mkdir -p $RPM_BUILD_ROOT%{_unitdir} $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig install -m644 %{SOURCE2000} $RPM_BUILD_ROOT%{_unitdir}/cpupower.service install -m644 %{SOURCE2001} $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/cpupower %ifarch x86_64 mkdir -p $RPM_BUILD_ROOT%{_mandir}/man8 pushd tools/power/x86/x86_energy_perf_policy > /dev/null %{__make} -s %{?_smp_mflags} DESTDIR=$RPM_BUILD_ROOT install popd > /dev/null pushd tools/power/x86/turbostat > /dev/null %{__make} -s %{?_smp_mflags} DESTDIR=$RPM_BUILD_ROOT install popd > /dev/null pushd tools/power/x86/intel-speed-select > /dev/null %{__make} -s %{?_smp_mflags} DESTDIR=$RPM_BUILD_ROOT install popd > /dev/null %endif pushd tools/thermal/tmon > /dev/null %{__make} -s %{?_smp_mflags} INSTALL_ROOT=$RPM_BUILD_ROOT install popd > /dev/null pushd tools/iio > /dev/null %{__make} -s %{?_smp_mflags} DESTDIR=$RPM_BUILD_ROOT install popd > /dev/null pushd tools/gpio > /dev/null %{__make} -s %{?_smp_mflags} DESTDIR=$RPM_BUILD_ROOT install popd > /dev/null install -m644 -D %{SOURCE2002} $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/kvm_stat pushd tools/kvm/kvm_stat > /dev/null %{__make} -s INSTALL_ROOT=$RPM_BUILD_ROOT install-tools %{__make} -s INSTALL_ROOT=$RPM_BUILD_ROOT install-man install -m644 -D kvm_stat.service $RPM_BUILD_ROOT%{_unitdir}/kvm_stat.service popd > /dev/null pushd tools/vm > /dev/null install -m755 slabinfo $RPM_BUILD_ROOT%{_bindir}/slabinfo install -m755 page_owner_sort $RPM_BUILD_ROOT%{_bindir}/page_owner_sort popd > /dev/null %endif %if %{with_bpftool} pushd tools/bpf/bpftool > /dev/null %{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install popd > /dev/null %endif %endif %ifarch noarch mkdir -p $RPM_BUILD_ROOT %if %{with_doc} # Sometimes non-world-readable files sneak into the kernel source tree. chmod -R a=rX Documentation find Documentation -type d | xargs --no-run-if-empty chmod u+w DocDir=$RPM_BUILD_ROOT%{_datadir}/doc/%{name}-doc-%{version}-%{release} # Copy the source over. mkdir -p $DocDir tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $DocDir %endif %endif popd > /dev/null ### ### Scripts. ### %if %{with_tools} %post -n %{name}-tools-libs /sbin/ldconfig %postun -n %{name}-tools-libs /sbin/ldconfig %endif # # This macro defines a %%post script for a kernel-lt*-devel package. # %%kernel_lt_devel_post [] # Note we don't run hardlink if ostree is in use, as ostree is # a far more sophisticated hardlink implementation. # https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526 # %define kernel_lt_devel_post() \ %{expand:%%post %{?1:%{1}-}devel}\ if [ -f /etc/sysconfig/kernel ]\ then\ . /etc/sysconfig/kernel || exit $?\ fi\ if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \ then\ (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\ /usr/bin/find . -type f | while read f; do\ hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\ done)\ fi\ %{nil} # # This macro defines a %%post script for a kernel-lt*-modules-extra package. # It also defines a %%postun script that does the same thing. # %%kernel_lt_modules_extra_post [] # %define kernel_lt_modules_extra_post() \ %{expand:%%post %{?1:%{1}-}modules-extra}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules-extra}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil} # # This macro defines a %%post script for a kernel-lt*-modules package. # It also defines a %%postun script that does the same thing. # %%kernel_lt_modules_post [] # %define kernel_lt_modules_post() \ %{expand:%%post %{?1:%{1}-}modules}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil} # This macro defines a %%posttrans script for a kernel-lt package. # %%kernel_lt_variant_posttrans [] # More text can follow to go at the end of this variant's %%post. # %define kernel_lt_variant_posttrans() \ %{expand:%%posttrans %{?1:%{1}-}core}\ if [ -x %{_sbindir}/weak-modules ]\ then\ %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\ fi\ /bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ %{nil} # # This macro defines a %%post script for a kernel-lt package and its devel package. # %%kernel_lt_variant_post [-v ] [-r ] # More text can follow to go at the end of this variant's %%post. # %define kernel_lt_variant_post(v:r:) \ %{expand:%%kernel_lt_devel_post %{?-v*}}\ %{expand:%%kernel_lt_modules_post %{?-v*}}\ %{expand:%%kernel_lt_modules_extra_post %{?-v*}}\ %{expand:%%kernel_lt_variant_posttrans %{?-v*}}\ %{expand:%%post %{?-v*:%{-v*}-}core}\ %{-r:\ if [ `uname -i` == "x86_64" ] &&\ [ -f /etc/sysconfig/kernel ]; then\ /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=%{name}%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\ fi}\ %{nil} # # This macro defines a %%preun script for a kernel-lt package. # %%kernel_lt_variant_preun # %define kernel_lt_variant_preun() \ %{expand:%%preun %{?1:%{1}-}core}\ /bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ if [ -x %{_sbindir}/weak-modules ]\ then\ %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\ fi\ %{nil} %kernel_lt_variant_preun %kernel_lt_variant_post -r kernel-smp if [ -x /sbin/ldconfig ] then /sbin/ldconfig -X || exit $? fi ### ### File lists. ### %if %{with_headers} %files headers /usr/include/* %endif %if %{with_doc} %files doc %defattr(-,root,root) %{_datadir}/doc/%{name}-doc-%{version}-%{release}/Documentation/* %dir %{_datadir}/doc/%{name}-doc-%{version}-%{release}/Documentation %dir %{_datadir}/doc/%{name}-doc-%{version}-%{release} %endif %if %{with_perf} %files -n perf %{_bindir}/perf %{_libdir}/libperf-jvmti.so %dir %{_libexecdir}/perf-core %{_libexecdir}/perf-core/* %{_datadir}/perf-core/* %{_mandir}/man[1-8]/perf* %{_sysconfdir}/bash_completion.d/perf %doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt %{_docdir}/perf-tip/tips.txt %files -n python3-perf %{python3_sitearch}/* %endif %if %{with_tools} %files -n %{name}-tools -f cpupower.lang %{_bindir}/cpupower %{_datadir}/bash-completion/completions/cpupower %ifarch x86_64 %{_bindir}/centrino-decode %{_bindir}/powernow-k8-decode %endif %{_unitdir}/cpupower.service %{_mandir}/man[1-8]/cpupower* %config(noreplace) %{_sysconfdir}/sysconfig/cpupower %ifarch x86_64 %{_bindir}/x86_energy_perf_policy %{_mandir}/man8/x86_energy_perf_policy* %{_bindir}/turbostat %{_mandir}/man8/turbostat* %{_bindir}/intel-speed-select %endif %{_bindir}/tmon %{_bindir}/iio_event_monitor %{_bindir}/iio_generic_buffer %{_bindir}/lsiio %{_bindir}/lsgpio %{_bindir}/gpio-hammer %{_bindir}/gpio-event-mon %{_bindir}/gpio-watch %{_mandir}/man1/kvm_stat* %{_bindir}/kvm_stat %{_unitdir}/kvm_stat.service %config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat %{_bindir}/page_owner_sort %{_bindir}/slabinfo %files -n %{name}-tools-libs %{_libdir}/libcpupower.so.0 %{_libdir}/libcpupower.so.0.0.1 %files -n %{name}-tools-libs-devel %{_libdir}/libcpupower.so %endif %if %{with_bpftool} %files -n bpftool %{_sbindir}/bpftool %{_sysconfdir}/bash_completion.d/bpftool %{_mandir}/man8/bpftool-cgroup.8.gz %{_mandir}/man8/bpftool-gen.8.gz %{_mandir}/man8/bpftool-iter.8.gz %{_mandir}/man8/bpftool-link.8.gz %{_mandir}/man8/bpftool-map.8.gz %{_mandir}/man8/bpftool-prog.8.gz %{_mandir}/man8/bpftool-perf.8.gz %{_mandir}/man8/bpftool.8.gz %{_mandir}/man8/bpftool-net.8.gz %{_mandir}/man8/bpftool-feature.8.gz %{_mandir}/man8/bpftool-btf.8.gz %{_mandir}/man8/bpftool-struct_ops.8.gz %endif # Empty meta-package. %ifarch x86_64 || aarch64 %files %endif # # This macro defines the %%files sections for a kernel-lt package # and its devel package. # %%kernel_lt_variant_files [-k vmlinux] # %define kernel_lt_variant_files(k:) \ %if %{2}\ %{expand:%%files -f %{name}-%{?3:%{3}-}core.list %{?1:-f %{name}-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\ %{!?_licensedir:%global license %%doc}\ %license linux-%{KVERREL}/COPYING-%{version}-%{release}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\ %ghost /boot/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \ %ghost /boot/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \ %ifarch aarch64\ /lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \ %ghost /boot/dtb-%{KVERREL}%{?3:+%{3}} \ %endif\ %attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\ %ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\ /lib/modules/%{KVERREL}%{?3:+%{3}}/config\ %ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\ %ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\ %ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\ %dir /lib/modules\ %dir /lib/modules/%{KVERREL}%{?3:+%{3}}\ %dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\ /lib/modules/%{KVERREL}%{?3:+%{3}}/build\ /lib/modules/%{KVERREL}%{?3:+%{3}}/source\ /lib/modules/%{KVERREL}%{?3:+%{3}}/updates\ /lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\ /lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\ %{_datadir}/doc/%{name}-keys/%{KVERREL}%{?3:+%{3}}\ %if %{1}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\ %endif\ /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\ %{expand:%%files -f %{name}-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\ %{expand:%%files %{?3:%{3}-}devel}\ %defverify(not mtime)\ /usr/src/kernels/%{KVERREL}%{?3:+%{3}}\ %{expand:%%files %{?3:%{3}-}devel-matched}\ %{expand:%%files -f %{name}-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\ %config(noreplace) /etc/modprobe.d/*-blacklist.conf\ %if %{?3:1} %{!?3:0}\ %{expand:%%files %{3}}\ %endif\ %endif\ %{nil} %kernel_lt_variant_files %{_use_vdso} %{with_std} %changelog * Fri Nov 22 2024 Akemi Yagi - 6.1.119 - Updated with the 6.1.119 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.119] - Enabled DRBD [https://elrepo.org/bugs/view.php?id=1492] * Sun Nov 17 2024 Akemi Yagi - 6.1.118 - Updated with the 6.1.118 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.118] * Thu Nov 14 2024 Akemi Yagi - 6.1.117 - Updated with the 6.1.117 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.117] * Fri Nov 08 2024 Akemi Yagi - 6.1.116 - Updated with the 6.1.116 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.116] * Thu Oct 31 2024 Akemi Yagi - 6.1.115 - Updated with the 6.1.115 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.115] * Tue Oct 22 2024 Akemi Yagi - 6.1.114 - Updated with the 6.1.114 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.114] * Thu Oct 17 2024 Akemi Yagi - 6.1.113 - Updated with the 6.1.113 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.113] * Mon Sep 30 2024 Akemi Yagi - 6.1.112 - Updated with the 6.1.112 source tarball. - Enable DPAA [https://elrepo.org/bugs/view.php?id=1484] - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.112] * Wed Sep 18 2024 Akemi Yagi - 6.1.111-1] - Updated with the 6.1.111 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.111] * Thu Sep 12 2024 Akemi Yagi - 6.1.110-1 - Updated with the 6.1.110 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.110] * Sun Sep 08 2024 Akemi Yagi - 6.1.109-1 - Updated with the 6.1.109 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.109] - Add conflicts to -tools sections * Wed Sep 04 2024 Akemi Yagi - 6.1.108-1 - Updated with the 6.1.108 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.108] * Thu Aug 29 2024 Akemi Yagi - 6.1.107-1 - Updated with the 6.1.107 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.107] * Sun Aug 18 2024 Akemi Yagi - 6.1.106-1 - Updated with the 6.1.106 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.106] * Wed Aug 14 2024 Akemi Yagi - 6.1.105-1 - Updated with the 6.1.105 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.105] - Re-enable bpftool * Sun Aug 11 2024 Akemi Yagi - 6.1.104-1 - Updated with the 6.1.104 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.104] * Sat Aug 03 2024 Akemi Yagi - 6.1.103-1 - Updated with the 6.1.103 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.103] - Disable bpftool to resolve build error https://www.spinics.net/lists/stable/msg763207.html * Sat Jul 27 2024 Akemi Yagi - 6.1.102-1 - Updated with the 6.1.102 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.102] * Thu Jul 25 2024 Akemi Yagi - 6.1.101-1 - Updated with the 6.1.101 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.101] * Thu Jul 18 2024 Akemi Yagi - 6.1.100-1 - Updated with the 6.1.100 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.100] * Mon Jul 15 2024 Akemi Yagi - 6.1.99-1 - Updated with the 6.1.99 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.99] * Thu Jul 11 2024 Akemi Yagi - 6.1.98-1 - Updated with the 6.1.98 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.98] * Fri Jul 05 2024 Akemi Yagi - 6.1.97-1 - Updated with the 6.1.97 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.97] * Thu Jun 27 2024 Akemi Yagi - 6.1.96-1 - Updated with the 6.1.96 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.96] * Fri Jun 21 2024 Akemi Yagi - 6.1.95-1 - Updated with the 6.1.95 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.95] * Sun Jun 16 2024 Akemi Yagi - 6.1.94-1 - Updated with the 6.1.94 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.94] * Wed Jun 12 2024 Akemi Yagi - 6.1.93-1 - Updated with the 6.1.93 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.93] * Sat May 25 2024 Akemi Yagi - 6.1.92-1 - Updated with the 6.1.92 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.92] * Sat May 18 2024 Akemi Yagi - 6.1.91-2 - Config change [https://elrepo.org/bugs/view.php?id=1452] * Fri May 17 2024 Akemi Yagi - 6.1.91-1 - Updated with the 6.1.91 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.91] * Thu May 02 2024 Akemi Yagi - 6.1.90-1 - Updated with the 6.1.90 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.90] * Mon Apr 29 2024 Akemi Yagi - 6.1.89-1 - Updated with the 6.1.89 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.89] * Sat Apr 27 2024 Akemi Yagi - 6.1.88-1 - Updated with the 6.1.88 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.88] * Wed Apr 17 2024 Akemi Yagi - 6.1.87-1 - Updated with the 6.1.87 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.87] * Sat Apr 13 2024 Akemi Yagi - 6.1.86-1 - Updated with the 6.1.86 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.86] * Wed Apr 10 2024 Akemi Yagi - 6.1.85-1 - Updated with the 6.1.85 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.85] * Wed Apr 03 2024 Akemi Yagi - 6.1.84-1 - Updated with the 6.1.84 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.84] * Tue Mar 26 2024 Akemi Yagi - 6.1.83-1 - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.83] * Fri Mar 15 2024 Akemi Yagi - 6.1.82-1 - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.82] * Wed Mar 06 2024 Akemi Yagi - 6.1.81-1 - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.81] * Fri Mar 01 2024 Akemi Yagi - 6.1.80-1 - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.80] * Fri Feb 23 2024 Akemi Yagi - 6.1.79-1 - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.79] - Enable CONFIG_NFS_V2 [https://elrepo.org/bugs/view.php?id=1431] * Fri Feb 16 2024 Akemi Yagi - 6.1.78-1 - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.78] * Mon Feb 05 2024 Akemi Yagi - 6.1.77-1 - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.77] * Wed Jan 31 2024 Akemi Yagi - 6.1.76-1 - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.76] * Thu Jan 25 2024 Akemi Yagi - 6.1.75-1 - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.75] * Mon Jan 22 2024 Akemi Yagi - 6.1.74-2 - Enable SND_SOC_INTEL_SOUNDWIRE_SOF_MACH (x86_64) [https://elrepo.org/bugs/view.php?id=1421] * Sat Jan 20 2024 Akemi Yagi - 6.1.74-1 - Updated with the 6.1.74 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.74] * Tue Jan 16 2024 Akemi Yagi - 6.1.73-1 - Updated with the 6.1.73 source tarball. - Enable UDMABUF [https://elrepo.org/bugs/view.php?id=1415] - Enable NTFS3_FS [https://elrepo.org/bugs/view.php?id=1417] - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.73] * Wed Jan 10 2024 Akemi Yagi - 6.1.72-1 - Updated with the 6.1.72 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.72] * Fri Jan 05 2024 Akemi Yagi - 6.1.71-1 - Updated with the 6.1.71 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.71] * Mon Jan 01 2024 Akemi Yagi - 6.1.70-1 - Updated with the 6.1.70 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.70] * Wed Dec 20 2023 Akemi Yagi - 6.1.69-1 - Updated with the 6.1.69 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.69] * Wed Dec 13 2023 Akemi Yagi - 6.1.68-1 - Updated with the 6.1.68 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.68] * Mon Dec 11 2023 Akemi Yagi - 6.1.67-1 - Updated with the 6.1.67 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.67] * Fri Dec 08 2023 Akemi Yagi - 6.1.66-1 - Updated with the 6.1.66 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.66] * Sun Dec 03 2023 Akemi Yagi - 6.1.65-1 - Updated with the 6.1.65 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.65] * Tue Nov 28 2023 Akemi Yagi - 6.1.64-1 - Updated with the 6.1.64 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.64] * Mon Nov 20 2023 Akemi Yagi - 6.1.63-1 - Updated with the 6.1.63 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.63] * Wed Nov 08 2023 Akemi Yagi - 6.1.62-1 - Updated with the 6.1.62 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.62] * Thu Nov 02 2023 Akemi Yagi - 6.1.61-1 - Updated with the 6.1.61 source tarball. - Provides: add distro kernel to kernel-devel. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.61] * Wed Oct 25 2023 Akemi Yagi - 6.1.60-1 - Updated with the 6.1.60 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.60] * Thu Oct 19 2023 Akemi Yagi - 6.1.59-1 - Updated with the 6.1.59 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.59] * Sun Oct 15 2023 Akemi Yagi - 6.1.58-1 - Updated with the 6.1.58 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.58] * Tue Oct 10 2023 Akemi Yagi - 6.1.57-1 - Updated with the 6.1.57 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.57] * Fri Oct 06 2023 Akemi Yagi - 6.1.56-1 - Updated with the 6.1.56 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.56] * Sat Sep 23 2023 Akemi Yagi - 6.1.55-1 - Updated with the 6.1.55 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.55] * Tue Sep 19 2023 Akemi Yagi - 6.1.54-1 - Updated with the 6.1.54 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.54] * Wed Sep 13 2023 Akemi Yagi - 6.1.53-1 - Updated with the 6.1.53 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.53] - CONFIG_VIDEO_V4L2_SUBDEV_API=y - CONFIG_VIDEO_CAMERA_SENSOR=y * Wed Sep 06 2023 Akemi Yagi - 6.1.52-1 - Updated with the 6.1.52 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.52] * Sat Sep 02 2023 Akemi Yagi - 6.1.51-1 - Updated with the 6.1.51 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.51] * Wed Aug 30 2023 Akemi Yagi - 6.1.50-1 - Updated with the 6.1.50 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.50] * Mon Aug 28 2023 Akemi Yagi - 6.1.49-1 - Updated with the 6.1.49 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.49] * Sat Aug 26 2023 Akemi Yagi - 6.1.48-1 - Updated with the 6.1.48 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.48] * Wed Aug 23 2023 Akemi Yagi - 6.1.47-1 - Updated with the 6.1.47 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.47] * Wed Aug 16 2023 Akemi Yagi - 6.1.46-1 - Updated with the 6.1.46 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.46] * Fri Aug 11 2023 Akemi Yagi - 6.1.45-1 - Updated with the 6.1.45 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.45] * Tue Aug 08 2023 Akemi Yagi - 6.1.44-1 - Updated with the 6.1.44 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.44] - CONFIG_CPU_SRSO=y, CONFIG_ARCH_HAS_CPU_FINALIZE_INIT=y - For x86_64 only. * Thu Aug 03 2023 Akemi Yagi - 6.1.43-1 - Updated with the 6.1.43 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.43] - CONFIG_AMPERE_ERRATUM_AC03_CPU_38=y - For aarch64 only. * Thu Jul 27 2023 Akemi Yagi - 6.1.42-1 - Updated with the 6.1.42 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.42] * Mon Jul 24 2023 Akemi Yagi - 6.1.41-1 - Updated with the 6.1.41 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.41] * Sun Jul 23 2023 Akemi Yagi - 6.1.40-1 - Updated with the 6.1.40 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.40] * Wed Jul 19 2023 Akemi Yagi - 6.1.39-1 - Updated with the 6.1.39 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.39] - CONFIG_HID_KUNIT_TEST=m * Wed Jul 05 2023 Akemi Yagi - 6.1.38-1 - Updated with the 6.1.38 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.38] * Sat Jul 01 2023 Akemi Yagi - 6.1.37-1 - Updated with the 6.1.37 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.37] - Added: CONFIG_LOCK_MM_AND_FIND_VMA=y * Wed Jun 28 2023 Akemi Yagi - 6.1.36-1 - Updated with the 6.1.36 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.36] * Wed Jun 21 2023 Akemi Yagi - 6.1.35-1 - Updated with the 6.1.35 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.35] * Wed Jun 14 2023 Akemi Yagi - 6.1.34-1 - Updated with the 6.1.34 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.34] * Fri Jun 09 2023 Akemi Yagi - 6.1.33-1 - Updated with the 6.1.33 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.33] * Mon Jun 05 2023 Akemi Yagi - 6.1.32-1 - Updated with the 6.1.32 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.32] * Tue May 30 2023 Alan Bartlett - 6.1.31-1 - Updated with the 6.1.31 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.31] * Wed May 24 2023 Alan Bartlett - 6.1.30-1 - Updated with the 6.1.30 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.30] * Wed May 17 2023 Alan Bartlett - 6.1.29-1 - Updated with the 6.1.29 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.29] * Wed May 10 2023 Alan Bartlett - 6.1.28-1 - Updated with the 6.1.28 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.28] - CONFIG_ARCH_ROCKCHIP=y, CONFIG_PCIE_ROCKCHIP=y, - CONFIG_PCIE_ROCKCHIP_HOST=m, CONFIG_PCIE_ROCKCHIP_DW_HOST=y, - CONFIG_MTD_NAND_CORE=m, CONFIG_MTD_RAW_NAND=m, - CONFIG_MTD_NAND_ROCKCHIP=m, CONFIG_MTD_NAND_ECC=y, - CONFIG_ARC_EMAC_CORE=m, CONFIG_EMAC_ROCKCHIP=m, - CONFIG_DWMAC_ROCKCHIP=m, CONFIG_SPI_ROCKCHIP=m, - CONFIG_SPI_ROCKCHIP_SFC=m, CONFIG_PINCTRL_ROCKCHIP=m, - CONFIG_GPIO_ROCKCHIP=m, CONFIG_ROCKCHIP_THERMAL=m, - CONFIG_DRM_ROCKCHIP=m, CONFIG_ROCKCHIP_VOP=y, - CONFIG_ROCKCHIP_VOP2=y, CONFIG_ROCKCHIP_ANALOGIX_DP=y, - CONFIG_ROCKCHIP_CDN_DP=y, CONFIG_ROCKCHIP_DW_HDMI=y, - CONFIG_ROCKCHIP_DW_MIPI_DSI=y, CONFIG_ROCKCHIP_INNO_HDMI=y, - CONFIG_ROCKCHIP_LVDS=y, CONFIG_ROCKCHIP_RGB=y, - CONFIG_ROCKCHIP_RK3066_HDMI=y, CONFIG_DRM_ANALOGIX_DP=m, - CONFIG_DRM_DW_HDMI=m, CONFIG_DRM_DW_HDMI_I2S_AUDIO=m, - CONFIG_DRM_DW_MIPI_DSI=m, CONFIG_SND_SOC_ROCKCHIP=m, - CONFIG_SND_SOC_ROCKCHIP_I2S=m, CONFIG_SND_SOC_ROCKCHIP_I2S_TDM=m, - CONFIG_SND_SOC_ROCKCHIP_PDM=m, CONFIG_SND_SOC_ROCKCHIP_SPDIF=m, - CONFIG_SND_SOC_ROCKCHIP_MAX98090=m, CONFIG_SND_SOC_ROCKCHIP_RT5645=m, - CONFIG_SND_SOC_RK3288_HDMI_ANALOG=m, CONFIG_SND_SOC_RK3399_GRU_SOUND=m, - CONFIG_SND_SOC_MAX98090=m, CONFIG_SND_SOC_RT5514=m, - CONFIG_SND_SOC_RT5514_SPI=m, CONFIG_MMC_DW_ROCKCHIP=m, - CONFIG_COMMON_CLK_ROCKCHIP=y, CONFIG_CLK_PX30=y, CONFIG_CLK_RK3308=y, - CONFIG_CLK_RK3328=y, CONFIG_CLK_RK3368=y, CONFIG_CLK_RK3399=y, - CONFIG_CLK_RK3568=y, CONFIG_ROCKCHIP_TIMER=y, CONFIG_ROCKCHIP_MBOX=y, - CONFIG_ROCKCHIP_IOMMU=y, CONFIG_ROCKCHIP_GRF=y, - CONFIG_ROCKCHIP_IODOMAIN=m, CONFIG_ROCKCHIP_PM_DOMAINS=y, - CONFIG_ARM_RK3399_DMC_DEVFREQ=m, CONFIG_PM_DEVFREQ_EVENT=y, - CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=m, CONFIG_ROCKCHIP_SARADC=m, - CONFIG_PWM_ROCKCHIP=m, CONFIG_PHY_ROCKCHIP_DP=m, - CONFIG_PHY_ROCKCHIP_DPHY_RX0=m, CONFIG_PHY_ROCKCHIP_EMMC=m, - CONFIG_PHY_ROCKCHIP_INNO_HDMI=m, CONFIG_PHY_ROCKCHIP_INNO_USB2=m, - CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY=m, CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=m, - CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=m, CONFIG_PHY_ROCKCHIP_PCIE=m, - CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=m, CONFIG_PHY_ROCKCHIP_TYPEC=m, - CONFIG_PHY_ROCKCHIP_USB=m, CONFIG_NVMEM_ROCKCHIP_EFUSE=m, - CONFIG_NVMEM_ROCKCHIP_OTP=m and CONFIG_CRYPTO_DEV_ROCKCHIP=m - For aarch64 only. [https://elrepo.org/bugs/view.php?id=1345] * Sun Apr 30 2023 Alan Bartlett - 6.1.27-1 - Updated with the 6.1.27 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.27] * Wed Apr 26 2023 Alan Bartlett - 6.1.26-1 - Updated with the 6.1.26 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.26] * Thu Apr 20 2023 Alan Bartlett - 6.1.25-1 - Updated with the 6.1.25 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.25] * Fri Apr 14 2023 Alan Bartlett - 6.1.24-1 - Updated with the 6.1.24 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.24] - CONFIG_EROFS_FS=m, CONFIG_EROFS_FS_XATTR=y, - CONFIG_EROFS_FS_POSIX_ACL=y, CONFIG_EROFS_FS_SECURITY=y, - CONFIG_EROFS_FS_ZIP=y and CONFIG_EROFS_FS_ZIP_LZMA=y - [https://elrepo.org/bugs/view.php?id=1343] * Wed Apr 05 2023 Alan Bartlett - 6.1.23-1 - Updated with the 6.1.23 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.23] * Thu Mar 30 2023 Alan Bartlett - 6.1.22-1 - Updated with the 6.1.22 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.22] * Wed Mar 22 2023 Alan Bartlett - 6.1.21-1 - Updated with the 6.1.21 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.21] * Fri Mar 17 2023 Alan Bartlett - 6.1.20-1 - Updated with the 6.1.20 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.20] * Mon Mar 13 2023 Alan Bartlett - 6.1.19-1 - Updated with the 6.1.19 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.19] * Sat Mar 11 2023 Alan Bartlett - 6.1.18-1 - Updated with the 6.1.18 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.18] * Sat Mar 11 2023 Alan Bartlett - 6.1.17-1 - Updated with the 6.1.17 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.17] * Fri Mar 10 2023 Alan Bartlett - 6.1.16-1 - Updated with the 6.1.16 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.16] * Fri Mar 03 2023 Alan Bartlett - 6.1.15-1 - Updated with the 6.1.15 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.15] * Sat Feb 25 2023 Alan Bartlett - 6.1.14-1 - Updated with the 6.1.14 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.14] * Wed Feb 22 2023 Alan Bartlett - 6.1.13-1 - Updated with the 6.1.13 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.13] - Converted this specification file to build a kernel-lt package set. * Wed Feb 15 2023 Alan Bartlett - 6.1.12-1 - Updated with the 6.1.12 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.12] * Thu Feb 09 2023 Alan Bartlett - 6.1.11-1 - Updated with the 6.1.11 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.11] * Sun Feb 05 2023 Alan Bartlett - 6.1.10-1 - Updated with the 6.1.10 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.10] - CONFIG_NTB_NETDEV=m, CONFIG_NTB=m, CONFIG_NTB_MSI=y, - CONFIG_NTB_PINGPONG=m, CONFIG_NTB_TOOL=m, CONFIG_NTB_PERF=m, - CONFIG_NTB_MSI_TEST=m and CONFIG_NTB_TRANSPORT=m - For aarch64 [https://elrepo.org/bugs/view.php?id=1322] * Wed Feb 01 2023 Alan Bartlett - 6.1.9-1 - Updated with the 6.1.9 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.9] - CONFIG_MEDIA_CONTROLLER_DVB=y, CONFIG_VIDEO_USBTV=m, - CONFIG_VIDEO_AU0828=m, CONFIG_VIDEO_AU0828_V4L2=y, - CONFIG_VIDEO_CX231XX=m, CONFIG_VIDEO_CX231XX_ALSA=m, - CONFIG_VIDEO_CX231XX_DVB=m, CONFIG_DVB_AS102=m, - CONFIG_DVB_B2C2_FLEXCOP_USB=m, CONFIG_DVB_USB_V2=m, - CONFIG_DVB_USB_AF9015=m, CONFIG_DVB_USB_AF9035=m, - CONFIG_DVB_USB_ANYSEE=m, CONFIG_DVB_USB_AU6610=m, - CONFIG_DVB_USB_AZ6007=m, CONFIG_DVB_USB_CE6230=m, - CONFIG_DVB_USB_DVBSKY=m, CONFIG_DVB_USB_EC168=m, - CONFIG_DVB_USB_GL861=m, CONFIG_DVB_USB_LME2510=m, - CONFIG_DVB_USB_MXL111SF=m, CONFIG_DVB_USB_RTL28XXU=m, - CONFIG_DVB_USB_ZD1301=m, CONFIG_DVB_USB=m, - CONFIG_DVB_USB_A800=m, CONFIG_DVB_USB_AF9005=m, - CONFIG_DVB_USB_AF9005_REMOTE=m, CONFIG_DVB_USB_AZ6027=m, - CONFIG_DVB_USB_CINERGY_T2=m, CONFIG_DVB_USB_CXUSB=m, - CONFIG_DVB_USB_DIB0700=m, CONFIG_DVB_USB_DIB3000MC=m, - CONFIG_DVB_USB_DIBUSB_MB=m, CONFIG_DVB_USB_DIBUSB_MC=m, - CONFIG_DVB_USB_DIGITV=m, CONFIG_DVB_USB_DTT200U=m, - CONFIG_DVB_USB_DTV5100=m, CONFIG_DVB_USB_DW2102=m, - CONFIG_DVB_USB_GP8PSK=m, CONFIG_DVB_USB_M920X=m, - CONFIG_DVB_USB_NOVA_T_USB2=m, CONFIG_DVB_USB_OPERA1=m, - CONFIG_DVB_USB_PCTV452E=m, CONFIG_DVB_USB_TECHNISAT_USB2=m, - CONFIG_DVB_USB_TTUSB2=m, CONFIG_DVB_USB_UMT_010=m, - CONFIG_DVB_USB_VP702X=m, CONFIG_DVB_USB_VP7045=m, - CONFIG_SMS_USB_DRV=m, CONFIG_DVB_TTUSB_BUDGET=m, - CONFIG_DVB_TTUSB_DEC=m, CONFIG_MEDIA_COMMON_OPTIONS=y, - CONFIG_CYPRESS_FIRMWARE=m, CONFIG_TTPCI_EEPROM=m, - CONFIG_VIDEO_CX2341X=m, CONFIG_DVB_B2C2_FLEXCOP=m, - CONFIG_SMS_SIANO_MDTV=m, CONFIG_SMS_SIANO_RC=y, - CONFIG_VIDEO_CX25840=m, CONFIG_MEDIA_TUNER_E4000=m, - CONFIG_MEDIA_TUNER_FC0011=m, CONFIG_MEDIA_TUNER_FC0012=m, - CONFIG_MEDIA_TUNER_FC0013=m, CONFIG_MEDIA_TUNER_FC2580=m, - CONFIG_MEDIA_TUNER_IT913X=m, CONFIG_MEDIA_TUNER_MAX2165=m, - CONFIG_MEDIA_TUNER_MT2063=m, CONFIG_MEDIA_TUNER_MT2266=m, - CONFIG_MEDIA_TUNER_MXL5005S=m, CONFIG_MEDIA_TUNER_MXL5007T=m, - CONFIG_MEDIA_TUNER_R820T=m, CONFIG_MEDIA_TUNER_TDA18218=m, - CONFIG_MEDIA_TUNER_TDA18250=m, CONFIG_MEDIA_TUNER_TUA9001=m, - CONFIG_DVB_STB0899=m, CONFIG_DVB_STB6100=m, CONFIG_DVB_STV090x=m, - CONFIG_DVB_STV6110x=m, CONFIG_DVB_MN88472=m, CONFIG_DVB_MN88473=m, - CONFIG_DVB_SI2165=m, CONFIG_DVB_CX24116=m, CONFIG_DVB_CX24120=m, - CONFIG_DVB_CX24123=m, CONFIG_DVB_DS3000=m, CONFIG_DVB_MT312=m, - CONFIG_DVB_S5H1420=m, CONFIG_DVB_SI21XX=m, CONFIG_DVB_STB6000=m, - CONFIG_DVB_STV0288=m, CONFIG_DVB_STV0299=m, CONFIG_DVB_STV0900=m, - CONFIG_DVB_STV6110=m, CONFIG_DVB_TDA10086=m, CONFIG_DVB_TDA8083=m, - CONFIG_DVB_TDA826X=m, CONFIG_DVB_TUNER_CX24113=m, - CONFIG_DVB_TUNER_ITD1000=m, CONFIG_DVB_ZL10039=m, - CONFIG_DVB_AF9013=m, CONFIG_DVB_AS102_FE=m, CONFIG_DVB_CX22700=m, - CONFIG_DVB_CX22702=m, CONFIG_DVB_CXD2841ER=m, - CONFIG_DVB_DIB3000MB=m, CONFIG_DVB_DIB3000MC=m, - CONFIG_DVB_DIB7000M=m, CONFIG_DVB_DIB7000P=m, CONFIG_DVB_EC100=m, - CONFIG_DVB_GP8PSK_FE=m, CONFIG_DVB_NXT6000=m, CONFIG_DVB_RTL2830=m, - CONFIG_DVB_RTL2832=m, CONFIG_DVB_TDA10048=m, CONFIG_DVB_TDA1004X=m, - CONFIG_DVB_ZD1301_DEMOD=m, CONFIG_DVB_STV0297=m, - CONFIG_DVB_VES1820=m, CONFIG_DVB_AU8522=m, CONFIG_DVB_AU8522_DTV=m, - CONFIG_DVB_AU8522_V4L=m, CONFIG_DVB_BCM3510=m, CONFIG_DVB_LG2160=m, - CONFIG_DVB_NXT200X=m, CONFIG_DVB_S5H1411=m, CONFIG_DVB_DIB8000=m, - CONFIG_DVB_PLL=m, CONFIG_DVB_TUNER_DIB0070=m, - CONFIG_DVB_TUNER_DIB0090=m, CONFIG_DVB_AF9033=m, - CONFIG_DVB_ATBM8830=m, CONFIG_DVB_ISL6421=m, CONFIG_DVB_ISL6423=m, - CONFIG_DVB_IX2505V=m, CONFIG_DVB_LGS8GXX=m, CONFIG_DVB_LNBP21=m, - CONFIG_DVB_LNBP22=m, CONFIG_DVB_M88RS2000=m and CONFIG_DVB_SP2=m - For aarch64 and x86_64. [https://elrepo.org/bugs/view.php?id=1321] * Wed Jan 25 2023 Alan Bartlett - 6.1.8-1 - Updated with the 6.1.8 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.8] * Wed Jan 18 2023 Alan Bartlett - 6.1.7-1 - Updated with the 6.1.7 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.7] * Sat Jan 14 2023 Alan Bartlett - 6.1.6-1 - Updated with the 6.1.6 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.6] * Thu Jan 12 2023 Alan Bartlett - 6.1.5-1 - Updated with the 6.1.5 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.5] - CONFIG_BLK_DEV_FD=m - For x86_64 [https://elrepo.org/bugs/view.php?id=1308] * Fri Jan 06 2023 Alan Bartlett - 6.1.4-1 - Updated with the 6.1.4 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.4] * Wed Jan 04 2023 Alan Bartlett - 6.1.3-1 - Updated with the 6.1.3 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.3] * Sat Dec 31 2022 Alan Bartlett - 6.1.2-1 - Updated with the 6.1.2 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.2] * Wed Dec 21 2022 Alan Bartlett - 6.1.1-1 - Updated with the 6.1.1 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.1] - CONFIG_GENERIC_IRQ_CHIP=y, CONFIG_ARCH_BCM=y, CONFIG_ARCH_BCM2835=y, - CONFIG_ARCH_BCM_IPROC=y, CONFIG_ARCH_BCMBCA=y, CONFIG_ARCH_BRCMSTB=y, - CONFIG_ARM_BRCMSTB_AVS_CPUFREQ=y, CONFIG_ARM_RASPBERRYPI_CPUFREQ=m, - CONFIG_PCIE_IPROC=y, CONFIG_PCIE_IPROC_PLATFORM=y, - CONFIG_PCIE_IPROC_MSI=y, CONFIG_PCIE_BRCMSTB=y, - CONFIG_RASPBERRYPI_FIRMWARE=m, CONFIG_MTD_OF_PARTS_BCM4908=y, - CONFIG_MTD_OF_PARTS_LINKSYS_NS=y, CONFIG_BLK_DEV_UBLK=m, - CONFIG_AHCI_BRCM=m, CONFIG_BCM4908_ENET=y, CONFIG_BGMAC=y, - CONFIG_BGMAC_PLATFORM=y, CONFIG_BCM_CYGNUS_PHY=m, - CONFIG_MDIO_BCM_IPROC=y, CONFIG_MDIO_BUS_MUX=y, - CONFIG_MDIO_BUS_MUX_BCM_IPROC=y, CONFIG_TOUCHSCREEN_IPROC=m, - CONFIG_TOUCHSCREEN_RASPBERRYPI_FW=m, CONFIG_SERIAL_8250_BCM2835AUX=m, - CONFIG_SERIAL_8250_BCM7271=y, CONFIG_SERIAL_BCM63XX=y, - CONFIG_SERIAL_BCM63XX_CONSOLE=y, CONFIG_HW_RANDOM_BCM2835=y, - CONFIG_HW_RANDOM_IPROC_RNG200=y, CONFIG_I2C_BCM2835=m, - CONFIG_I2C_BCM_IPROC=y, CONFIG_I2C_BRCMSTB=y, CONFIG_SPI_BCM2835=m, - CONFIG_SPI_BCM2835AUX=m, CONFIG_SPI_BCM63XX_HSSPI=m, - CONFIG_SPI_BCM_QSPI=y, CONFIG_PTP_1588_CLOCK_DTE=y, - CONFIG_GENERIC_PINCTRL_GROUPS=y, CONFIG_GENERIC_PINMUX_FUNCTIONS=y, - CONFIG_PINCTRL_BCM2835=y, CONFIG_PINCTRL_BCM4908=y, - CONFIG_PINCTRL_IPROC_GPIO=y, CONFIG_PINCTRL_NS2_MUX=y, - CONFIG_GPIO_GENERIC=y, CONFIG_GPIO_RASPBERRYPI_EXP=m, - CONFIG_GPIO_BCM_XGS_IPROC=y, CONFIG_GPIO_BRCMSTB=y, - CONFIG_SENSORS_RASPBERRYPI_HWMON=m, CONFIG_BCM2711_THERMAL=y, - CONFIG_BCM2835_THERMAL=y, CONFIG_BRCMSTB_THERMAL=y, - CONFIG_BCM_NS_THERMAL=y, CONFIG_BCM_SR_THERMAL=y, - CONFIG_BCM2835_WDT=m, CONFIG_BCM7038_WDT=m, CONFIG_DRM_V3D=m, - CONFIG_DRM_VC4=m, CONFIG_DRM_VC4_HDMI_CEC=y, - CONFIG_SND_BCM2835_SOC_I2S=m, CONFIG_USB_EHCI_BRCMSTB=m, - CONFIG_USB_BRCMSTB=m, CONFIG_USB_OHCI_HCD_PLATFORM=m, - CONFIG_BRCM_USB_PINMAP=y, CONFIG_MMC_SDHCI_IPROC=m, - CONFIG_MMC_BCM2835=m, CONFIG_MMC_SDHCI_BRCMSTB=m, - CONFIG_RTC_DRV_BRCMSTB=y, CONFIG_DMA_BCM2835=m, - CONFIG_BCM_VIDEOCORE=m, CONFIG_BCM2835_VCHIQ=m, CONFIG_VCHIQ_CDEV=y, - CONFIG_SND_BCM2835=m, CONFIG_VIDEO_BCM2835=m, - CONFIG_BCM2835_VCHIQ_MMAL=m, CONFIG_CLK_BCM2711_DVP=y, - CONFIG_CLK_BCM2835=y, CONFIG_CLK_BCM_63XX=y, CONFIG_COMMON_CLK_IPROC=y, - CONFIG_CLK_BCM_NS2=y, CONFIG_CLK_BCM_SR=y, CONFIG_CLK_RASPBERRYPI=m, - CONFIG_BCM2835_MBOX=m, CONFIG_BCM_FLEXRM_MBOX=m, CONFIG_BCM2835_POWER=y, - CONFIG_SOC_BRCMSTB=y, CONFIG_BCM_PMB=y, CONFIG_BRCMSTB_PM=y, - CONFIG_BCM_IPROC_ADC=m, CONFIG_PWM_BCM_IPROC=y, CONFIG_PWM_BCM2835=m, - CONFIG_PWM_BRCMSTB=m, CONFIG_PWM_RASPBERRYPI_POE=m, - CONFIG_BCM7038_L1_IRQ=y, CONFIG_BCM7120_L2_IRQ=y, - CONFIG_BRCMSTB_L2_IRQ=y, CONFIG_RESET_BRCMSTB=y, - CONFIG_RESET_BRCMSTB_RESCAL=y, CONFIG_RESET_RASPBERRYPI=m, - CONFIG_RESET_SIMPLE=y, CONFIG_PHY_BCM_SR_USB=y, - CONFIG_PHY_BCM_NS_USB2=y, CONFIG_PHY_BCM_NS_USB3=y, CONFIG_PHY_NS2_PCIE=y, - CONFIG_PHY_NS2_USB_DRD=y, CONFIG_PHY_BRCM_SATA=y, CONFIG_PHY_BRCM_USB=y, - CONFIG_PHY_BCM_SR_PCIE=y, CONFIG_NVMEM_BCM_OCOTP=y and - CONFIG_CRYPTO_DEV_BCM_SPU=m - For aarch64. [https://elrepo.org/bugs/view.php?id=1299] - CONFIG_BLK_DEV_UBLK=m - For aarch64 and x86_64. [https://elrepo.org/bugs/view.php?id=1300] * Sun Dec 11 2022 Alan Bartlett - 6.1.0-1 - Updated with the 6.1 source tarball. - CONFIG_ARM64_ERRATUM_2658417=y, CONFIG_ARCH_FORCE_MAX_ORDER=11, - CONFIG_HAVE_ARCH_HUGE_VMALLOC=y, CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y, - CONFIG_SOFTIRQ_ON_OWN_STACK=y, CONFIG_XEN_PV_MSR_SAFE=y, - CONFIG_X86_AMD_PSTATE=y, CONFIG_HAVE_KVM_DIRTY_RING_TSO=y, - CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL=y, CONFIG_HAVE_RUST=y, - CONFIG_ARCH_SUPPORTS_CFI_CLANG=y, CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y, - CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1, CONFIG_AHCI_DWC=m, - CONFIG_NGBE=m, CONFIG_NET_VENDOR_ADI=y, CONFIG_ADIN1110=m, - CONFIG_MLX5_EN_MACSEC=y, CONFIG_PCS_ALTERA_TSE=m, CONFIG_IOSM=m, - CONFIG_TOUCHSCREEN_COLIBRI_VF50=m, CONFIG_SENSORS_MAX31760=m, - CONFIG_SENSORS_TPS546D24=m, CONFIG_SENSORS_EMC2305=m, - CONFIG_HP_WATCHDOG=m, CONFIG_EXAR_WDT=m, - CONFIG_DRM_USE_DYNAMIC_DEBUG=y, CONFIG_DRM_GEM_DMA_HELPER=m, - CONFIG_SND_SOC_AMD_PS=m, CONFIG_SND_SOC_AMD_PS_MACH=m, - CONFIG_SND_SOC_SOF_AMD_REMBRANDT=m, CONFIG_SND_SOC_SOF_INTEL_SKL=m, - CONFIG_SND_SOC_SOF_SKYLAKE=m, CONFIG_SND_SOC_SOF_KABYLAKE=m, - CONFIG_SND_SOC_CROS_EC_CODEC=m, CONFIG_SND_SOC_CS42L42_CORE=m, - CONFIG_SND_SOC_CS42L83=m, CONFIG_SND_SOC_ES8326=m, - CONFIG_SND_SOC_SRC4XXX_I2C=m, CONFIG_SND_SOC_SRC4XXX=m, - CONFIG_HID_VRC2=m, CONFIG_HID_PXRC=m, CONFIG_CROS_TYPEC_SWITCH=m, - CONFIG_QCOM_CLK_APCS_MSM8916=m, CONFIG_QCOM_CLK_APCS_SDX55=m, - CONFIG_AMD_PMF=m, CONFIG_COMMON_CLK_VC7=m, CONFIG_IPQ_APSS_6018=m, - CONFIG_MSM_GCC_8909=m, CONFIG_SC_GPUCC_8280XP=m, - CONFIG_SM_DISPCC_6115=m, CONFIG_SM_DISPCC_8450=m, - CONFIG_SM_GCC_6375=m, CONFIG_LTRF216A=m, - CONFIG_ALIBABA_UNCORE_DRW_PMU=m, CONFIG_CRYPTO_ARIA_AESNI_AVX_X86_64=m, - CONFIG_HISI_PTT=m, CONFIG_CRYPTO_LIB_UTILS=y, CONFIG_ZSTD_COMMON=y, - CONFIG_HAVE_ARCH_KMSAN=y, CONFIG_HAVE_DYNAMIC_FTRACE_NO_PATCHABLE=y, - CONFIG_KUNIT_DEFAULT_ENABLED=y, CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=m and - CONFIG_FORTIFY_KUNIT_TEST=m * Thu Dec 08 2022 Alan Bartlett - 6.0.12-1 - Updated with the 6.0.12 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.0.12] * Sat Dec 03 2022 Alan Bartlett - 6.0.11-1 - Updated with the 6.0.11 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.0.11] * Fri Nov 25 2022 Alan Bartlett - 6.0.10-1 - Updated with the 6.0.10 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.0.10] * Wed Nov 16 2022 Alan Bartlett - 6.0.9-1 - Updated with the 6.0.9 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.0.9] * Thu Nov 10 2022 Alan Bartlett - 6.0.8-1 - Updated with the 6.0.8 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.0.8] * Fri Nov 04 2022 Alan Bartlett - 6.0.7-1 - Updated with the 6.0.7 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.0.7] * Sat Oct 29 2022 Alan Bartlett - 6.0.6-1 - Updated with the 6.0.6 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.0.6] * Wed Oct 26 2022 Alan Bartlett - 6.0.5-1 - Updated with the 6.0.5 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.0.5] * Wed Oct 26 2022 Alan Bartlett - 6.0.4-1 - Updated with the 6.0.4 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.0.4] * Fri Oct 21 2022 Alan Bartlett - 6.0.3-1 - Updated with the 6.0.3 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.0.3] * Sat Oct 15 2022 Alan Bartlett - 6.0.2-1 - Updated with the 6.0.2 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.0.2] * Wed Oct 12 2022 Alan Bartlett - 6.0.1-1 - Updated with the 6.0.1 source tarball. - [https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.0.1] * Sun Oct 02 2022 Alan Bartlett - 6.0.0-1 - Updated with the 6.0 source tarball. - CONFIG_CONTEXT_TRACKING_IDLE=y, CONFIG_CONTEXT_TRACKING_USER=y, - CONFIG_HAVE_IMA_KEXEC=y, CONFIG_ACPI_VIDEO=y, CONFIG_ACPI_PRMT=y, - CONFIG_CRYPTO_POLYVAL_ARM64_CE=m, CONFIG_HAVE_IOREMAP_PROT=y, - CONFIG_HAVE_CONTEXT_TRACKING_USER=y, - CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y, - CONFIG_SOFTIRQ_ON_OWN_STACK=y, - CONFIG_ARCH_HAVE_TRACE_MMIO_ACCESS=y, CONFIG_ARCH_WANTS_THP_SWAP=y, - CONFIG_THP_SWAP=y, CONFIG_GET_FREE_REGION=y, - CONFIG_NF_FLOW_TABLE_PROCFS=y, CONFIG_PCI_DOE=y, - CONFIG_CXL_REGION=y, CONFIG_ARM_SCMI_POWER_CONTROL=m, - CONFIG_SCSI_BUSLOGIC=m, CONFIG_NET_VENDOR_WANGXUN=y, - CONFIG_TXGBE=m, CONFIG_BCM_NET_PHYPTP=m, CONFIG_CAN_NETLINK=y, - CONFIG_CAN_RX_OFFLOAD=y, CONFIG_CAN_CAN327=m, CONFIG_CAN_FLEXCAN=m, - CONFIG_CAN_GRCAN=m, CONFIG_CAN_CTUCANFD_PLATFORM=m, - CONFIG_CAN_ESD_USB=m, CONFIG_TCG_TIS_I2C=m, - CONFIG_PINCTRL_METEORLAKE=m, CONFIG_SENSORS_LT7182S=m, - CONFIG_APERTURE_HELPERS=y, CONFIG_DRM_BUDDY=m, - CONFIG_SND_CTL_FAST_LOOKUP=y, CONFIG_SND_HDA_CS_DSP_CONTROLS=m, - CONFIG_SND_HDA_EXT_CORE=m, CONFIG_SND_SOC_AMD_ST_ES8336_MACH=m, - CONFIG_SND_AMD_ASOC_REMBRANDT=m, CONFIG_SND_SOC_AMD_RPL_ACP6x=m, - CONFIG_SND_SOC_FSL_UTILS=m, CONFIG_SND_SOC_INTEL_AVS_MACH_DA7219=m, - CONFIG_SND_SOC_INTEL_AVS_MACH_DMIC=m, - CONFIG_SND_SOC_INTEL_AVS_MACH_HDAUDIO=m, - CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98357A=m, - CONFIG_SND_SOC_INTEL_AVS_MACH_NAU8825=m, - CONFIG_SND_SOC_INTEL_AVS_MACH_RT274=m, - CONFIG_SND_SOC_INTEL_AVS_MACH_RT286=m, - CONFIG_SND_SOC_INTEL_AVS_MACH_RT298=m, - CONFIG_SND_SOC_INTEL_AVS_MACH_RT5682=m, - CONFIG_SND_SOC_INTEL_AVS_MACH_SSM4567=m, - CONFIG_SND_SOC_SOF_IPC3=y, CONFIG_SND_SOC_SOF_INTEL_IPC4=y, - CONFIG_SND_SOC_SOF_INTEL_MTL=m, CONFIG_SND_SOC_SOF_METEORLAKE=m, - CONFIG_SND_SOC_HDA=m, CONFIG_SND_SOC_RT274=m, - CONFIG_SND_SOC_TAS2780=m, CONFIG_I2C_HID_OF_ELAN=m, - CONFIG_USB_ONBOARD_HUB=m, CONFIG_UCSI_STM32G0=m, - CONFIG_TYPEC_ANX7411=m, CONFIG_INFINIBAND_ERDMA=m, - CONFIG_RTC_DRV_NCT3018Y=m, CONFIG_CROS_KUNIT=m, CONFIG_P2SB=y, - CONFIG_SM_CAMCC_8450=m, CONFIG_SM_GPUCC_8350=m, - CONFIG_IIO_FORMAT_KUNIT_TEST=m, CONFIG_PWM_CLK=m, CONFIG_HNS3_PMU=m, - CONFIG_CRYPTO_FIPS_NAME="Red Hat Enterprise Linux 9 - Kernel Cryptographic API", - CONFIG_CRYPTO_XCTR=m, CONFIG_CRYPTO_HCTR2=m, CONFIG_CRYPTO_POLYVAL=m, - CONFIG_CRYPTO_POLYVAL_CLMUL_NI=m, CONFIG_CRYPTO_ARIA=m, CONFIG_CRYPTO_DEV_QAT=m, - CONFIG_CRYPTO_DEV_QAT_DH895xCC=m, CONFIG_CRYPTO_DEV_QAT_C3XXX=m, - CONFIG_CRYPTO_DEV_QAT_C62X=m, CONFIG_CRYPTO_DEV_QAT_4XXX=m, - CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m, CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m, - CONFIG_CRYPTO_DEV_QAT_C62XVF=m, CONFIG_CRYPTO_LIB_SHA1=y, - CONFIG_GENERIC_IOREMAP=y, CONFIG_POLYNOMIAL=m and - CONFIG_CPUMASK_KUNIT_TEST=m * Wed Sep 28 2022 Alan Bartlett - 5.19.12-0.rc4 - Updated with the 5.19.12 source tarball. - [https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.12] - The fourth release candidate of a kernel-ml package set for el9. * Sat Sep 24 2022 Alan Bartlett - 5.19.11-0.rc3 - Updated with the 5.19.11 source tarball. - [https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.11] - The third release candidate of a kernel-ml package set for el9. * Tue Sep 20 2022 Alan Bartlett - 5.19.10-0.rc2 - [https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.10] - The second release candidate of a kernel-ml package set for el9. * Sun Sep 18 2022 Alan Bartlett - 5.19.10-0.rc1 - Updated with the 5.19.10 source tarball. - [https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.10] - The first release candidate of a kernel-ml package set for el9. * Sat Aug 13 2022 Alan Bartlett - Forked this specification file to create a kernel-ml package set for the ELRepo Project. * Tue Aug 02 2022 Herton R. Krzesinski [5.14.0-70.22.1.el9_0] - PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt - remapping is enabled by IOMMU.") (Myron Stowe) [2109974 2084146] - PCI: vmd: Assign VMD IRQ domain before enumeration (Myron Stowe) [2109974 2084146] - rhel config: Set DMAR_UNITS_SUPPORTED (Jerry Snitselaar) [2105326 2094984] - iommu/vt-d: Make DMAR_UNITS_SUPPORTED a config setting (Jerry Snitselaar) [2105326 2094984]